Sequoia
The Sequoia has a modern flat-slope roof design with a built-up area of 7.3 meters by 12.1 meters (approx. 88.2 square meters) with an open living area, kitchen, 3 bedrooms and 2 bathrooms. The front elevation is 302 cm, tapering to 241 cm at the rear, with a pitched/cathedral ceiling running throughout the home.
Rysunki techniczne
Insulation kit walls consist of: 38mm x 90mm beams, metal angles and 19mm thick cover plates for external use. Remember that with external insulation the foundation must be larger.
|
Energy efficiency: Our solid wood walls add an extra U=0.22 and transfer virtually no heat or cold, increasing overall thermal benefits and comfort.
Tip: Mineral wool insulation is recommended for log construction. It is impermeable to moisture, has a higher R-value per inch than fiberglass, reduces noise levels and is environmentally friendly.
| Roof Insulation: Use locally sourced materials to add rafters above the tongue and groove roof boards. The thickness of the insulation is determined by the required R-value of the ceilings to meet local building codes. Dense polyurethane foam provides maximum benefits, the highest R-value for thickness, and is water-resistant. These additional rafters also increase the roof's load-bearing capacity. |  |
OPTION A: Upgrade wooden windows to triple glazed/low-E/argon filled.
Price: 4,116 PLN
OPTION B: Upgrade your timber windows to our exclusive maintenance free white PVC/triple glazed/low e/argon filled shuttered windows plus external blinds which are operated from the interior. These unique windows provide extra comfort and security. They improve overall energy efficiency by retaining heat in summer and cold in winter. They also reduce outside noise levels and provide complete darkness for day sleepers. (See our videos page)
Price: 9,870 PLN
Assembly: The model can be assembled in approximately 9 days with 3 people.
Tip: House cladding and damp-proofing are required in most regions when insulating.
Building regulations: PREMIUM series cottages and houses are manufactured in accordance with all structural requirements of building regulations.
The set includes:
- without floor, ready for installation on a concrete slab or wooden foundation
- pre-cut, numbered exterior walls
- pre-cut, numbered interior walls
- pre-cut, numbered gable pieces
- vaulted, cathedral ceilings
- pre-cut 100mm x 200mm glued timber roof purlins, beams spaced 558mm or less
- pre-cut, numbered 18mm tongue and groove roof boards
- pre-cut, numbered fascia boards
- 6 internal doors 812mm x 2040mm
- 4 single wide wooden windows 765mm x 990mm
- 4 double-wide wooden windows 1530mm x 990mm
- 2 single wide wooden windows 530 x 530
- 2 external doors 990mm x 2040mm 1/2 tempered glass
- door and window fittings
- 2 spare wall beams/spare roof boards
- 2000 log screws to connect all rows, gable elements, purlins
- packed/wrapped for assembly order
